Skip to content

IPMI#

IPMI is a universal standard (supported by almost all hardware) for managing and accessing servers. It is accessible even when a server is powered off and allows for remotely controlling servers and monitoring hardware status, including things such as temperature, power consumption, voltage, hardware errors, etc. VergeOS integrates with IPMI to provide for remote server power control (power on, power cycle, etc.) and convenient access via the VergeOS user interface.

Because IPMI deals with physical hardware, it only applies to host level nodes (not tenant nodes). {.is-info}



To Test IPMI Connectivity#

  1. From the Main Dashboard, click on the Nodes count box.
  2. Double-click the desired node to access the node dashboard.
  3. Under the IPMI submenu, click Test on the left menu.



IPMI Connection Status#

The node dashboard will indicate IPMI status and date/time of last time connected:

  • IPMI Status - "OK" indicates that the last attempt to connect was successful. If the last attempt was unsuccessful, an error message is displayed.

  • IPMI Last Connected - displays the last date/time the VergeOS system successfully connected to IPMI. (If there was never a successful IPMI connection, the field will report "NA".)

nodedash-ipmistatus.png.png



To Change Stored IPMI login credentials#

The following instructions provide for changing the IPMI credentials a node will use to interface with IPMI. Changing these fields does not perform IPMI user administration; connect to your IPMI web interface to add or change IPMI users. {.is-success}

  1. From the Node Dashboard, click Edit on the from the left menu.
  2. Enter a valid IPMI User. (IPMI user should have administrator-level privileges.)
  3. Enter IPMI Password.
  4. Click Submit to save the changes to the node.



To Access the IPMI Web Interface#

Successfully connecting to the IPMI web interface through the VergeOS user interface requires valid username/password is stored and appropriate networking configuration is in place for the system to interact with the node's IPMI. {.is-info}

  1. From the main dashboard, click Nodes.
  2. Double-click the desired node to access the node dashboard.
  3. Under the IPMI submenu on the left menu, click Connect.
  4. A new browser tab is opened to the IPMI web interface login page.


Get vergeOS license keys